IPSec server behind WAG54G

Discussion in 'Other Linksys Equipment' started by HexonRiad, Mar 9, 2005.

  1. HexonRiad

    HexonRiad Guest

    Hello every one,

    My network is setup like this:

    Internet --> WAG54G --> PIX-501 --> LAN
    WAG54G internal IP:
    PIX external IP:
    PIX internal IP:

    WAG54G has the following configuration:
    IPSec Pass Through: Enabled
    PPTP Pass Through: Enabled

    PIX has been configured as an IPsec VPN server, and I made the PIX a DMZ in WAG54G so it’s entirely open to the internet. I'm trying to achieve a connection from a dialup connection to the Cisco firewall but with no luck, looks like the router not passing the IPSec traffic inbound.

    PIX IPSec VPN server is working and accepting connection because I can test it by plugging a test machine to the network and connecting to the PIX firewall and it works fine.

    The firmware on the WAG54G is 1.02.9

    Is WAG54G unable to pass IPSec traffic inbound? Any one with similar setup?

    Thanks and regards,
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice