Ipv6 with Tomato weird issues

Discussion in 'Tomato Firmware' started by vick04, Feb 28, 2011.

  1. vick04

    vick04 Network Guru Member

    Does anyone have Tomato running with a fairly recent git? (2/23) Im using Tomato Firmware v1.28.7451 MIPSR2-Toastman K26 VPN but i cant seem to keep a connection with my tunnelbroker.net tunnel. The strange thing i noticed is that the tunnel would not become active unless i ping the router's ipv6 (2001:470:1f07:a1a::1 in my case). Another odd thing is if i stop pinging that address the connection will drop after 10mins or so but will become active again as soon as i ping it. Anyone know whats going on?
  2. david3

    david3 LI Guru Member

    I saw similar behaviour when I first setup ipv6 and found it was because I had it configured wrong.

    For the "Assigned IPv6 Prefix" and "Router IPv6 Address" I was using the he.net IPv6 Tunnel Endpoints. Once I changed them to use the Routed /64 it started working properly.

    I made a screenshot that might help in this earlier post (also reposted below):


  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice