Is NAS200 compatible with WD's "Power Up in Standby" feature?

Discussion in 'Cisco/Linksys Network Storage Devices' started by MastaP, Apr 29, 2011.

  1. MastaP

    MastaP Networkin' Nut Member


    I've bought two 1.5Tb Western Digital AV-GP (WD15EVDS) disks for my NAS200 today and started wondering, whether I should enable "Power Up in Standby" or not. I failed to find the answer here or on google.

    May be someone has an experience with PUIS on NAS200 and could make any suggestions?

    Thanks in advance!
  2. morgan_greywolf

    morgan_greywolf Addicted to LI Member

    Try it.

    Try it and see if it works. The worst thing that can happen is that the drive won't be detected at boot.
  3. jac_goudsmit

    jac_goudsmit Super Moderator Staff Member Member

    It doesn't hurt to try but I expect that it's not supported. Remember the kernel on the NAS200 (which would have to support this feature if I understand correctly) is several years old...

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice