Issues configuring WRV200 with RV082

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by duncan16, Sep 6, 2006.

  1. duncan16

    duncan16 LI Guru Member

    I've posted on here before with just configuring the RV082 with client machines... and tried to configure the windows xp clients to support L2TP... didn't go well... So I decided to go back to the client and ask them to fork out a bit more $green$ to purchase new routers for the satellite locations. We decided on the WRV200.

    I am now configuring them on a disconnected backbone that emulates the "internet"...

    RV082 > (internal: 192.168.0.x/
    WRV200 > (internal: 192.168.1.x/

    and configured the tunnel so that all settings for the tunnel are exact. I can now ping from the RV082 machine to the WRV200 machine, but not vica versa. I could only get this to work however, if I switched the WRV200 to be a Router instead of a Gateway.

    Am I running into this issue due to the fact that I'm running a local network, with two internal networks attached? (local network plugged into internet ports, then 2 networks from each of the routers, each hitting a single computer.) Wasn't sure how else to test in the "lab".

    Any help would be appreciated.

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice