JTAG backup/erase/flash help

Discussion in 'Modding Forum' started by rambev, Nov 29, 2005.

  1. rambev

    rambev Guest

    Hey guys, i got to tell everyone is on top of linksys wrt router and i'm sure almost all possible way to revive are available. Thanks to everyone who made the mistages and also thanks for those who helped all of those to get things back to normal.
    My story for posting this message is to get help from some of the few who actually made the JTAG cable work and revive the router. The reson i got my router brick is as soon as i flashed it i did a hard reset and since then i haven't been able to get it to work.
    I have WRT54G Version 4, i tried all possible way to revive of hardreset, shorting pins 15,16, ground 16, also pins 2,3 for erasing the nvram,tftp option. After all those procedure i got my self to build a JTAG cable and backed up everything. Currently using HairyDairyMaid_WRT54G_Debrick_Utility_v41, with in windows.
    As i said earlier i got myself to back up cfe,nvram,kernel,wholeflash. Then i flashed everything and now what should i do?
    I have been trying to just write the cfe and trying to get the tftp to work but no luck. I get a ping resonponse after i put the cfe but can't fo the tftp yet.
    So the problem is should i need to edit the cfe for corruption or get a different one but from where, casue they only have older version.
    I will be looking out for some reply and thanks for that.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice