Justin's Guide For Setting Up WDS

Discussion in 'Sveasoft Firmware' started by olanin, Aug 22, 2004.

  1. olanin

    olanin Network Guru Member

    Well after spending many+ hours to try to get it to work, thanks to the great users at linksysinfo.org, I finally got it to do what I wanted it to!

    Personally I work best with a reverse-engineering approach. Looking at what someone else did and filling in my own values. I didn’t see any good screen shots, and decided to include some of my setup and what I did. This might not be a perfect or ideal setup, but it works great for me. This guide might not help most people, but if it helps only one, I’ll be happy.

    Basically I loaded Alchemy-pre5.2.2 v2.09.1.8sv, reset everything to default, then loaded these settings.

    http://www.olanin.net/Justins guide to setting up WDS with Alchemy.doc
  2. Toxic

    Toxic Administrator Staff Member

    Thanks for the great information on WDS.

    could you please edit the link in the doc to show linksysinfo.org and not
    linksys.org :)

    I'll also add this to the FAQ as there is very little info on WDS setup proceedures.
  3. olanin

    olanin Network Guru Member

    Opps. I changed it. I hope it can help some people. I would like to redo it sometime and have a more detailed step-by-step procedure. I might wait till I get my third/fourth wrt54g and make a few guides.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice