Limiting upstream/downstream

Discussion in 'HyperWRT Firmware' started by witchrobin, Jan 14, 2005.

  1. witchrobin

    witchrobin Network Guru Member

    Anyone know if it's possible to limit upstream and downstream of a host or ethernet port? I am trying to limit bandwidth for a particular host connected to one of the port on the router. Any help is appreciated.
  2. Arno

    Arno Network Guru Member

    would using QoS not do the job enough for you?

    With QoS you can give one port (or application) more or less priviliges to use the available bandwith.
  3. anthonyc

    anthonyc Network Guru Member

  4. witchrobin

    witchrobin Network Guru Member

    If i use QoS to limit the Upstream Bandwidth, doesn't that limit all hosts connected to the router? With Ethernet Lan Port priority, I can only set priority and flow control, but not upstream/downstream rate.

    similar to anthonyc, i want to be able to control the real traffic rate up and downstream on a host or lan port basis.

    Is this possible with iptable?
  5. anthonyc

    anthonyc Network Guru Member

    Reply from Linsys

    Below is the reply from Linsys support, look like they are working on it to make the "Incoming Rate Limit" coming out again......
    But why remove from the latest version and add in later, just wait time....

    Gonzalves, Mary Grace: We appreciate your taking the time to give us valuable feedback. Please accept our apologies for the inconvenience this has caused you. I shall forward your concern to higher management. Linksys product management is currently looking into this matter. This is to be fixed by a
    Gonzalves, Mary Grace: This is to be fixed by a firmware. Possible release date depends on the result of the firmware testing. Right now, the firmware release date is yet to be confirmed by product management. Just visit the Linksys website for any updates. Im sorry for the inconvenience.
    Anthony: that's fine
  6. anthonyc

    anthonyc Network Guru Member

    About the "Upstream bandwidth" in QoS section

    Upstream is the connection going out on the router.
    Limit the outgoing bandwidth for the QoS policies in use, so you can control how much bandwidth a particular application is allowed to use
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice