Linksys Wrt54gs- V4

Discussion in 'Tomato Firmware' started by duzmor, Sep 30, 2007.

  1. duzmor

    duzmor Network Guru Member

    I have a Linksys wrt54gs -V4 Router and when I up-grade from dd-wrt v23 sp2 to Tomato Firmware V-1.08 the Light on the router that says Cisco will not light for connection of the wifi - when I use the dd-wrt Firmware the comes on and I have Wifi for My Lap top - I have pushed the Cisco Button and stiil will not connect - I have Re-set the Router

    What am I doing wroung

    Please Help

  2. Rafatk

    Rafatk Network Guru Member

    I think you need to clarify your problem a little bit.
    But as far as I understood, you can't connect thru WiFi to the router. And that is one problem.
    Have you checked your settings under Wireless menu? Try to clean up the list of wireless networks you connected with the computer and try to reconnect to it.
    And the LED is another problem, since Tomato is a little bit different than the DD-WRT. Under Administration tab you will have the LED/Button menu, there you can set the light for the CISCO light for many things, other wise you will need to write a script for the CISCO led to work as your wish.
    And you can search here in the forums for the script, I think there is a topic about it, but I can't find right now.

  3. duzmor

    duzmor Network Guru Member

    Thanks for the Help - The light is the Cisco Name On the Left - I think it for the SES

    I did get the Wifi to work with the router - it was the settings in the Laptop

    The Tomato 1.09 works great

    Again thanks for the help

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice