(just this!!) is unavaible from my network!

Discussion in 'Other Linksys Equipment' started by babanetcom, Nov 16, 2005.

  1. babanetcom

    babanetcom Network Guru Member

    I have a WAG54Gv2 (fw 1.01.05)

    I can't connect in any awy to

    It's not depending on my OS (winxp and knoppix), my browser (firefox, ie, ob1, konqueror), my DNS (same dns are being used by friends with the same isp and they works fine) or my security options (I tried with firewall down)

    It's the same with any pc of my network: I can't view and neither ping
    My tracert:
    Rilevazione instradamento verso [url][/url] []
    su un massimo di 30 punti di passaggio:
      1    <1 ms    <1 ms    <1 ms 
      2    54 ms    54 ms    55 ms 
      3    54 ms    54 ms    53 ms [] 
      4    58 ms    59 ms    58 ms [] 
      5    59 ms    59 ms    59 ms [] 
      6    60 ms    59 ms    60 ms [] 
      7   162 ms   160 ms   160 ms [] 
      8     *        *        *     Richiesta scaduta.
    A tracert from my friend:
    Any idea to fix the problem?
  2. mrbond82

    mrbond82 Network Guru Member



    I don't think there is anything wrong... Just look at the times that the server takes to respond... your friend has times that are in the 2000's milliseconds whereas you are have pings in 50's millisecond.

    The only reason I can think of why you aren't getting through is to do with the TCP/UDP time-out setting on your router. Macromedia is quite a way from Italy (I believe that's where you are connecting from).

    I am not sure if the official Linksys firmware has a setting to adjust the timeouts. That's what you need to do to fix it.

    Set the timeouts higher and try to connect again.

    I think your friend must be experiencing severe network lag because 2000 millisecond resonse time is 2 SECONDS and since there were 16 nodes there, I'm guessing your friend took 32 seconds to get any response from the Macromedia server. So no, you dont' want to model your setup on your friends' setup :grin: .

    Good luck.
  3. HiSpeed

    HiSpeed Network Guru Member


    Works fine for me (with 1.01.22) !
    Probably a DNS trouble. Try to force the DNS of your provider...
  4. babanetcom

    babanetcom Network Guru Member

    thank you both

    unfortunately I can't see anything to adjust my TCP/UDP TimeOut Settings :sad:

    and, HiSpeed, do you use annexA? Because I use annexA fw and the last one I found it's 1.01.05, not 1.01.22!

  5. HiSpeed

    HiSpeed Network Guru Member

    Yes, you can get it from there !
  6. babanetcom

    babanetcom Network Guru Member

    thanks a lot!
    I'll install it as soon as possible (maybe this evening) and I'll post the results!

    EDIT: are they official releases?
  7. HiSpeed

    HiSpeed Network Guru Member

    The word "official" has no sense with Linksys ! :sadbye:
  8. ReDFlaG

    ReDFlaG Network Guru Member

    but RMA does :rofl:
  9. babanetcom

    babanetcom Network Guru Member

    ?? :eek:
  10. TazUk

    TazUk Network Guru Member

    They're official in the sense that they are written by Linksys but are not on general release, i.e. you won't find them on the Linksys website. They would have been emailed by Linksys tech support to someone and then uploaded to this site. You have to treat them as beta releases, much like all Linksys firmware :grin:
  11. babanetcom

    babanetcom Network Guru Member

    however I am now runnning firmware version 1.01.22 (thanks HiSpeed) and everything seems to be ok!

      1    <1 ms    <1 ms    <1 ms 
      2    41 ms    42 ms    41 ms 
      3    41 ms    42 ms    42 ms 
      4    45 ms    45 ms    44 ms [] 
      5    46 ms    45 ms    45 ms [] 
      6    47 ms    47 ms    47 ms [] 
      7   168 ms   170 ms   169 ms [] 
      8   208 ms   207 ms     * [] 
      9   193 ms   193 ms   195 ms [] 
     10   257 ms   256 ms   258 ms [] 
     11   263 ms   264 ms   263 ms [] 
     12   247 ms   248 ms   246 ms [] 
     13   247 ms   250 ms   251 ms [] 
     14   262 ms   267 ms   259 ms  [url][/url] [] 
     15   265 ms   263 ms   258 ms  [url][/url] [] 
    and now timeouts are longer...
    thanks a lot!
  12. booly

    booly Network Guru Member

    Check you phone line, you may e have a noisy device connected.
    I've got similar issue a my mother home with a WAG645G ( ver slow conection even if the syn speed is good. Solve by finding that the phone plug was bad
  13. babanetcom

    babanetcom Network Guru Member

    thanks but now, after 2 fw upgrades, everything works fine :)
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice