Motel Network Splash Screen

Discussion in 'Networking Issues' started by gfunk, Apr 1, 2009.

  1. gfunk

    gfunk LI Guru Member

    Hi All,

    I have a wireless network set up at a motel that I work at. The chain has recently changed it's standards and now they require that I present the guest with a “Terms of Use†that the guest must accept prior to being permitted to use the network. Is there an aftermarket firmware option that I could use to do this. I know some of them have options for a splash screen but would I be able to have some sort of accept/decline button on that screen?

    Thanks for the help.

    Just some info about the network:
    It consists of 3 wrt54g's connected via ethernet. 1 is connected to the modem and a computer in the lobby via ethernet, the other 2 are connected to that one via ethernet. Everything runs on stock firmware. The three routers operate on channels 1,6,11 and each one has the same ssid. AP isolation is turned on for each router and dhcp is turned off for the 2 serving as ap's.

    I also posted this in the General Discussion section...sorry if that is inappropriate.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice