Nas200 jac0 ssh login

Discussion in 'Cisco/Linksys Network Storage Devices' started by infernal, Aug 16, 2008.

  1. infernal

    infernal Network Guru Member

  2. jac_goudsmit

    jac_goudsmit Super Moderator Staff Member Member

    Create a directory rc.d in the root of the first hard disk. In that directory create a file called rc.reenabletelnet. Use Notepad++ or another Linux-compatible editor to put the following in that file and save it in Unix text format (linefeed-only line endings).
    rm /harddisk/volume_1/conf/no_telnetd
    Turn the NAS200 off by pushing and releasing the power button (it takes a few seconds). Then turn it back on. Once you hear the double beeps, telnet should be re-enabled. You can then remove the rc.reenabletelnet.

    Good luck!

  3. infernal

    infernal Network Guru Member

    thanks Jac :)

    i create with ftp the rc.c in /DISK 1

    and move the file to that dir.

    reboot the nas200 and still the same :/

  4. infernal

    infernal Network Guru Member

    Hi Jac,

    it's all ok for now :)

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice