need help with wds

Discussion in 'Cisco/Linksys Wireless Routers' started by yaksplat, Sep 1, 2005.

  1. yaksplat

    yaksplat Network Guru Member

    This is what i want to do:


    The last router on the right should have an IP of bad.

    I'm using DD-WRT 22 on all three routers, and all the routers are version 3.0.

    In the Wireless WDS section, the routers have the mac addresses of the other computers that this router should be talking to, correct? If that's the case, the middle router should have two entries. Does order matter? I have yet to get this to work. I originally had wds working with 2 routers, but as soon as i added a third to the mac list in router 2, i could no longer ping it and had to reset the router.

    Also, on the router status screen, the MAC address does not match what is shown on the Wireless WDS screen. The value of the last entry is off by one. It'll show 2D or 2F instead of 2E, i don't understand why.

  2. t4thfavor

    t4thfavor Network Guru Member

    use lazy wds and it should be all good it grants wds to all computers who ask for it
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice