Need Help With Wrt54gs V5!!!

Discussion in 'DD-WRT Firmware' started by TEDIUM88, Jul 24, 2006.

  1. TEDIUM88

    TEDIUM88 Guest

    okay, I was trying to flash dd-wrt on my router, and I was able to load the vxworks killer, but when I try to TFTP the dd-wrt micro generic I'm unable to get responses from the server. I tried manually setting the IP but it didn't work. In the wiki it says I can leave the dns automatically configured, but when I manually set the IP, windows won't let me do this; not sure if that's the problem, but it's the way I've differed from the wiki instructions, and either way I don't know what the dns settings should be.
  2. Azmi

    Azmi Guest

    I just migrate my WRT54G V5 to DD-WRT Micro. It works. Just follow the threaded discussion at for details. Browse through the whole discussion so that you will not miss all the required steps.

    Hope you can still salvage your V5 router!
  3. dbcch

    dbcch LI Guru Member

    I'll update the wiki about the DNS settings. Basically the point was that DNS doesn't matter for the time being, but you can set the first to

    Some users who have your problem seem to have had luck setting their network adaptor to 10Base-T hafl-duplex.
  4. Toxic

    Toxic Administrator Staff Member

    DNS for flashing, is not a requirement
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice