Network connectivity lost with WRV200

Discussion in 'Networking Issues' started by dmelin, Apr 11, 2007.

  1. dmelin

    dmelin Guest

    I recently purchased a WRV200. I set evrything up an my connectivity is fine thru my cable modem. The problem I have is when I plug it into my Hewlett Packard 2324 switch. I lose all connectivity for all my devices on my network. I tried straight thru and crossover with no luck. Anybody ever have this problem.
  2. ifican

    ifican Network Guru Member

    Make sure the port you are plugging into on the 2324 is set for a trunk or not set for a vlan (not even sure if its a manageable switch but would account for the loss of connectivity). Switch to switch should be a crossover unless one of the ports is mdix. Something else to look at, is some switches are set up in such a way that they have 1 or 2 specific ports used for uplinks. Are you sure that the xover cable is a good one?
  3. Slimey

    Slimey Network Guru Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice