New firmware for WAG54G V2 (v1.01.01)

Discussion in 'Other Linksys Equipment' started by shider, Jun 30, 2005.

  1. shider

    shider Network Guru Member

  2. ravenrocha

    ravenrocha Network Guru Member

    What's new is this firmware. Is the same as in the version for Australia?
  3. Ofloo

    Ofloo Network Guru Member

    well it seems new .. look at the date, and .. was that firmware of au good or ??
  4. shider

    shider Network Guru Member

    Changelog is not available but firmware works fine. The time is updated correctly, there is no bug in dyndns support like in 1.00.47 firmware and all ports are Stealth now (no need to use DMZ)
  5. HiSpeed

    HiSpeed Network Guru Member


    Is there a WDS menu for wireless repeating or bridging ?
  6. feddmond31

    feddmond31 Network Guru Member

    pptp vpn passthrough broken in this firmware as in original, 10047 is ok on vpn passthrough but dyndns broken (means i cannot use my wag54gv2 as i wish!)
  7. shider

    shider Network Guru Member

    unfortunately no
  8. TazUk

    TazUk Network Guru Member

    Does remote admin work with this version as it didn't with :?
  9. Ofloo

    Ofloo Network Guru Member

    yes it did only not in the suggested port nmap your router and you'll notice that it is on a different port .. weird enough, don't ask i don't remember what port it was.. not sure in this version tho.. but in the previous one .. it was a weird port also you might need to enable upnp or something..
  10. Wild_Weasel

    Wild_Weasel Network Guru Member

    Just upgraded, seem more stable! SNMP works OK and DSL stats reported OK. I have noticed that the system uptime reported via SNMP is incorrect and reports that the WAG has been up for 488 days even when it's only been running for a couple of minutes. Can somebody else confirm this ? I have checked the OID using a couple of tools and they both report the same. I have reported this to Linksys who stated that 1.01 is a Beta version!
  11. Arabian

    Arabian Network Guru Member


    WAG54G-EU V2 really needs WDS for wireless repeating to be added.
    Then it will be the ADSL Router KING!

    Does anyone know when this will be done so we can use it with WRE54G?

    Thank you,

  12. Arabian

    Arabian Network Guru Member

    Could you please tell me how can I see my router SNMP to check the bandwidth usage?

    Thank you,

  13. shider

    shider Network Guru Member

    Quotes from Whirlpool Forums - Linksys WAG54G v2 Thread

  14. Futureline

    Futureline Network Guru Member

    I just want to post my experience as a standard user. My knowledge is limited. I tested the WAG54G with a ping some P2P software and some networktools.

    Installed this firmware and I can confirm that there is more stability.
    The SNMP now works. Upgrading through LAN was no problem. No new screens or settings from up. In my humble opinion I say. Update. It’s worth it.

    I wonder where this firmware comes from. Who made It.?
  15. TazUk

    TazUk Network Guru Member

    It's a beta firmware from Linksys, so it's made by Linksys :p
  16. Wild_Weasel

    Wild_Weasel Network Guru Member

    I use one of three products to monitor the SNMP interface on the WAG, the first is PRTG. This product is great for monitoring usage and has an easy interface, stats are also impressive. The second is MRTG, simular to PRTG but less graphically impressive and slightly more geeky. The final product is GETIF a small GUI program that lets me monitor the OIDs in the unit. This is realy good for providing LinkSys with information when reporting problems, something I seem to have to do a lot!

    Hope this helps.
  17. Ofloo

    Ofloo Network Guru Member

    lmfao maybe they should run it as stable cause it works beter then that one :p
  18. caneblu

    caneblu Network Guru Member

    I try this firmware for a 2 days, seems working everything as well 8)
    SNMP work, i've trapped into my pc with kiwi syslog, also the uptime seems working.
  19. deian9

    deian9 Network Guru Member

    dsl sync longtime fixed?

    have they fixed the bug that makes it takes ages to sync with dsl connection?
  20. hijglander

    hijglander Network Guru Member

    Although all ports are STEALTH now, I'll switch back to version 1.00.47.

    The wireless speed is low... It never reaches 1MB/s against atleast 2,5MB/s with the 1.00.47 firmware.
  21. Ofloo

    Ofloo Network Guru Member

  22. Arabian

    Arabian Network Guru Member

    Thank you Ofloo! :)
  23. arrarro

    arrarro Network Guru Member

    Hi everybody, I am from Italy

    May I use this AU firmware on EU model? official EU linksys site still has no new update for WAG54G V2... :cry:
  24. caneblu

    caneblu Network Guru Member

    I'm in italy too, the version works fine with or alice
  25. TazUk

    TazUk Network Guru Member

    No as the Australian, (AU), routers have more memory, just download the EU firmware from the link posted in this thread ;)

    You will have to do a full reset i.e. power up router with the reset button held in, keep it held in for 20 secs. This will wipe your settings so you will need to enter them again. If you don't do a full reset some things will not work properly.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice