New Thibor user - info about WRT54GL

Discussion in 'HyperWRT Firmware' started by turbo53, May 14, 2006.

  1. turbo53

    turbo53 Network Guru Member

    Just bought a WRT54GL and installed Thibor 15c. I did this to resolve some QoS and BitTorrent issues with my Vonage adapter and everything is working perfectly now. Thanks, Thibor.

    Just one piece of information for you. The web site says that HyperWRT works with the WRT54GL for serial numbers beginning with CL7A. My box has a serial number prefix of CL7B and everything works fine. Here is some data from this version of the router in case this helps with future development. If there is anything else you want to know, just ask. But be gentle as I am not a Linux guru and would need specific instructions.

    Thanks again and I'll definitely make a donation soon!

    **** From WRT54GL serial prefix CL7B *****

    BusyBox v1.1.2 (2006.04.29-14:07+0000) Built-in shell (ash)
    Enter 'help' for a list of built-in commands.

    /tmp # dmesg
    CPU revision is: 00029008
    Primary instruction cache 16kb, linesize 16 bytes (2 ways)
    Primary data cache 8kb, linesize 16 bytes (2 ways)
    Linux version 2.4.20 (carl@Carl-Laptop) (gcc version 3.2.3 with Broadcom modific
    ations) #189 Fri May 12 10:55:17 BST 2006
    Setting the PFC value as 0x15
    Determined physical RAM map:
    memory: 01000000 @ 00000000 (usable)
    On node 0 totalpages: 4096
    zone(0): 4096 pages.
    zone(1): 0 pages.
    zone(2): 0 pages.
    Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
    CPU: BCM5352 rev 0 at 200 MHz
    Calibrating delay loop... 199.47 BogoMIPS
    Memory: 14320k/16384k available (1406k kernel code, 2064k reserved, 112k data, 6
    8k init, 0k highmem)
    Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
    Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
    Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
    Checking for 'wait' instruction... unavailable.
    POSIX conformance testing by UNIFIX
    PCI: no core
    PCI: Fixing up bus 0
    Linux NET4.0 for Linux 2.4
    Based upon Swansea University Computer Society NET3.039
    Initializing RT netlink socket
    Starting kswapd
    devfs: v1.12c (20020818) Richard Gooch (
    devfs: boot_options: 0x1
    Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
    pty: 256 Unix98 ptys configured
    Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en
    ttyS00 at 0xb8000300 (irq = 3) is a 16550A
    ttyS01 at 0xb8000400 (irq = 0) is a 16550A
    HDLC line discipline: version $Revision: $, maxframe=4096
    N_HDLC line discipline registered.
    PPP generic driver version 2.4.2
    Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
    Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
    Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
    Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
    Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
    Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
    Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
    number of CFI chips: 1
    0: offset=0x0,size=0x2000,blocks=8
    1: offset=0x10000,size=0x10000,blocks=63
    Flash device: 0x400000 at 0x1c000000
    Physically mapped flash: squashfs filesystem found at block 945
    le32_to_cpu(trx->magic)=0x30524448 trx->magic=0x30524448
    bcm947xx_parts[1].offset=0x0 trx->offsets[1]=0x1 off
    off=0xec600 off1=0x400000 size=0x400000
    (Not Found Lang Block)off=0xec600 off1=0x3a0000 size=0x400000
    nvram: offset=0x3f0000 size=0x10000
    Creating 5 MTD partitions on "Physically mapped flash":
    0x00000000-0x00040000 : "pmon"
    0x00040000-0x003a0000 : "linux"
    0x000ec600-0x003a0000 : "rootfs"
    mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-o
    0x003a0000-0x003f0000 : "lang"
    0x003f0000-0x00400000 : "nvram"
    sflash: found no supported devices
    NET4: Linux TCP/IP 1.0 for NET4.0
    IP Protocols: ICMP, UDP, TCP, IGMP
    IP: routing cache hash table of 512 buckets, 4Kbytes
    TCP: Hash tables configured (established 1024 bind 2048)
    Linux IP multicast router 0.06 plus PIM-SM
    ip_conntrack version 2.1 (128 buckets, 2048 max) - 368 bytes per conntrack
    ip_conntrack_rtsp v0.01 loading
    ip_nat_rtsp v0.01 loading
    ip_conntrack_pptp version 1.9 loaded
    ip_nat_pptp version 1.5 loaded
    ip_tables: (C) 2000-2002 Netfilter core team
    IPP2P v0.8.1_rc1 loading
    netfilter PSD loaded - (c) astaro AG
    ipt_time loading
    NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
    NET4: Ethernet Bridge 008 for NET4.0
    802.1Q VLAN Support v1.7 Ben Greear <>
    All bugs added by David S. Miller <>
    cramfs: wrong magic
    VFS: Mounted root (squashfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 68k freed
    SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock(31,3)
    mii_rreg(417) val16=3000, val=3000
    mii_wreg(354) val16=3300, val=3300
    mii_rreg(417) val16=3100, val=3100
    eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller
    Register /dev/ctmisc device, major:250 minor:0
    eth1: Broadcom BCM4320 802.11 Wireless Controller
    ctmisc_ioctl: cmd=0x11
    data_init(): base = 0xbfc01e00
    data_init(): location = [1]
    ctmisc_ioctl: index=1
    ctmisc_ioctl: cmd=0x13
    data_init(): base = 0xbfc3f400
    data_init(): location = [1]
    ctmisc_ioctl: index=1
    ctmisc_ioctl: cmd=0x15
    data_init(): base = 0xbfc3fe32
    data_init(): location = [0]
    ctmisc_ioctl: index=0
    ctmisc_ioctl: cmd=0x17
    Intel 28F320C3 2Mx16 BotBFlash Type: Intel 28F320C3 2Mx16 BotB
    Algorithmics/MIPS FPU Emulator v1.5
    vlan0: dev_set_promiscuity(master, 1)
    device eth0 entered promiscuous mode
    device vlan0 entered promiscuous mode
    device eth1 entered promiscuous mode
    br0: port 2(eth1) entering learning state
    br0: port 1(vlan0) entering learning state
    br0: port 2(eth1) entering forwarding state
    br0: topology change detected, propagating
    br0: port 1(vlan0) entering forwarding state
    br0: topology change detected, propagating
    vlan1: Setting MAC address to 00 16 b6 da a0 a8.
    vlan1: add 01:00:5e:00:00:01 mcast address to master interface
    HTB: quantum of class 200030 is small. Consider r2q change.
    HTB: quantum of class 200040 is small. Consider r2q change.
    nvram_commit(): init
    nvram_commit(): end
    htb: class 10001 isn't work conserving ?!
    nvram_commit(): init
    nvram_commit(): end
    nvram_commit(): init
    nvram_commit(): end
  2. dsr70

    dsr70 Network Guru Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice