Noob need help PLS PLS PLS PLS

Discussion in 'DD-WRT Firmware' started by rakowa, Jun 3, 2007.

  1. rakowa

    rakowa LI Guru Member

    PLS help me i jus gt a wrt54gl and i follow all the things i need to do to flash and so call install dd-wrt. after i install, i reset my router then i try to get into nothings coming out. after i look around the net and saw some telnet stuff and try to telnet and want 2 type in this common to set up the login id or stuff.
    ~ # nvram set http_passwd=""
    ~ # nvram commit
    nvram_commit(): end
    ~ #
    but then after i telnet it ask me to login as wrt54gl so i type admin than it ask me for password but when i try to type nothing comes out and after that i cant login it says:
    login incorrect
    dd-wrt v23 sp2 std (c) 2006 newmedia-net gmbh
    Release: 09/15/06(SVN revision: 3932)

    after all this it happen again for 3 time after 3 time error it says connection to host lost. did i brick my router. i only bought it for 1 day. pls help meeee
  2. Mastec

    Mastec Network Guru Member

    When you telnet the username is "root" without the quotes and password is whatever you set it to be.
  3. rakowa

    rakowa LI Guru Member

    ok but sorry(cos im a noob). but i did not set any password and i cant type any
    thing when it pop out password. so i dont have to type any password?
  4. rakowa

    rakowa LI Guru Member

    ok i found out my password aready. i still got some problems can pls help me out
    i can get in to telnet aready but when i try to use http i cant get it set up. it keep coming out with a blank page help me plss
  5. Toxic

    Toxic Administrator Staff Member

    try resetting the device. press the reset button for 30 seconds. then try logging on again with

    username: root
    password: admin
  6. Toxic

    Toxic Administrator Staff Member

    failing this try using the tftp program (in downloads) to upgrade the firmware with a different firmware build. try thibor15c build.
  7. rakowa

    rakowa LI Guru Member

    wait. in the wiki installation i did till

    Upload The Firmware
    Previous versions: Press and hold the reset button on the back of the router for 30 seconds. See also Reset And Reboot.

    do i need to do
    Flashing with Command Line??
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice