PAP2T Clicking Noise / Distortion

Discussion in 'Other Linksys Equipment' started by wlaidlaw, Nov 12, 2007.

  1. wlaidlaw

    wlaidlaw LI Guru Member


    I have just bought a Linksys PAP2T and it seems to be working fine except that when someone talks on the line there is a terrible distorted clicking sound. Just like if the volume level is too high. I have tried turning down the line gain. This just makes everything including the clicking quieter!

    Connection wise there is no packet loss to and I have tried a direct connection from my PAP2T to the cable modem.

    I have tried various phone handsets but no difference.

    Any ideas?


  2. mazilo

    mazilo Network Guru Member

    Can you configure the 2nd empty line with any free VoSP, i.e. FWD, and call others on the same VoSP net to see if this problem still persists?
  3. wlaidlaw

    wlaidlaw LI Guru Member

    Thanks for your reply mazilo.

    I tried configuring the unit with FWD - still the same. I also setup 3CX on a windows box on lthe LAN and configured it to use that - still the same.

    I guessed there must be some hardware problem so I returned it to the supplier. Who after a bit of a delay have credited my account.

    Thanks anyway

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice