Port 12345 closed, not blocked on wag54gv2?

Discussion in 'Other Linksys Equipment' started by treno, Dec 31, 2005.

  1. treno

    treno Network Guru Member

    Hello all,
    sygate Quick scan today showed that port 12345 on my wag54gv2 with 1.01.22 firmware was only CLOSED, not BLOCKED.
    I rememter it used to be blocked some weeks ago.
    The only change to configuration I made lately was to enable IPSEC passthrough. So I disable it and, shure enaugh, 12345 was blocked again.
    ipsec enabled again and 12345 only closed again!!!

    Is port 12345 really related to Ipsec or is it simply an error in the firmware?

    Any experience with 1.01.27 on the subject?
  2. HiSpeed

    HiSpeed Network Guru Member


    This bug exists since 1.01.15...
    Workaround : forward the port 12345 to an unused IP address...
  3. treno

    treno Network Guru Member

    Your workaround works!
    Thank you
  4. bimbobo

    bimbobo Network Guru Member

    I have Linksys AG241 and still have the same problem described here.
    Now I run with Firmware 2.01.00 and still have to make workaroung to avoid this issue..
  5. bimbobo

    bimbobo Network Guru Member

    Linksys Denmark mailed me that this bug will be closed in next firmware..
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice