PPPoE with VLAN 7 tagging (VDSL2)

Discussion in 'Networking Issues' started by pdschmid, Jun 30, 2007.

  1. pdschmid

    pdschmid LI Guru Member

    I just got VDSL2 from Deutsche Telekom (T-Home). My problem is that I can't seem to figure out how to use my Linksys router instead of the crappy router that came with.
    I know it is somewhat special. According to the information I could find, you need to set the WAN port to VLAN 7 and tag it as such.
    I tried it with the GUI of DD-WRT v24 with no success.
    I tried it with Tomato using the following in telnet/ssh:
    # nvram set debug_nocommit=1
    # vconfig add vlan1 7
    # nvram set wan_ifname=vlan7
    # service wan restart

    This didn't work either.
    Does anyone know how to do this correctly? Firmware is secondary. I'd prefer Tomato, but I don't mind installing a different one as long as I can get it to work with it.


    Patrick Schmid
  2. Toxic

    Toxic Administrator Staff Member

    what linksys router do you have?
  3. pdschmid

    pdschmid LI Guru Member

    WRT54GS v1
  4. nibbs

    nibbs LI Guru Member

    Did you already read through the related thread on onlinekosten.de?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice