problem installing DD WRT to WRT54GL

Discussion in 'DD-WRT Firmware' started by koprataat, Jan 3, 2006.

  1. koprataat

    koprataat Network Guru Member

    I got my first WRT54GL today and discovered that it is working with 4.30.0 firmware. Unfortunately I did not succeed to install DD-WRT software into it. I also tried to install some older official WRT54G firmware (v3.0.....) but it did not succeed as well. So I still have 4.30.0 in it and having no improvement.

    Am I stupid or the machine? :)
  2. koprataat

    koprataat Network Guru Member

    SysInfo and SysInfo1 say following: Vendor:LINKSYS ModelName:WRT54GL Firmware Version:v4.30.0 , Sep 28 2005 #:001 Boot Version:v3.7.4 CodePattern:W54G Country:Europe RF Status:enabled RF Firmware Version:v4.30.0 RF Domain:ETSI (channel 1~13) RF Channel:11 RF SSID:linksys -----Dynamic Information RF Mac Address:XX:XX:XX:XX:XX:XX LAN Mac Address:XX:XX:XX:XX:XX:XX WAN Mac Address:XX:XX:XX:XX:XX:XX Hardware Version:2.0 Device Serial No.:
    language=EN; Flash Type=Intel 28F320C3 2Mx16 BotB; CPU Clock=200; sdram_init=0x010b; sdram_config=0x0062; sdram_ncdl=0xfe0009; pa0b0=0x168b; pa0b1=0xfabf; pa0b2=0xfeaf; Write Mac Address=XX:XX:XX:XX:XX:XX; get wl_gmode=1; totalram=14815232, freeram=6438912, bufferram=1298432; uptime=86; Total IEs = 1 eou_configured=0; get_eou_index=1; get_sn_index=0; get_sn=; get_mac_index=2; get_mac=XX:XX:XX:XX:XX:XX; ses_status=; ses_count=0;

    On the bottom the machine is called WRT54GL not WRT54G v4 like some have seen.
  3. JaLooNz

    JaLooNz Network Guru Member

    Did you try flashing the DDWRT mini generic firmware?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice