Problem installing WUSB11 V4 on WIN 98se Computer

Discussion in 'Other Linksys Equipment' started by cfj6, Aug 9, 2006.

  1. cfj6

    cfj6 LI Guru Member

    I have an established wireless network with 4 computers accessing the internet through a router and DSL Modem.
    I am unable to attach another computer running Win 98se (USB 1.1) with a WUSB11 V4 adapter. This computer has been successfully connected to the router using a WUSB11 V2.6 adapter.The V4 adapter is new and the V4 driver was downloaded from the LinkSys site. I am able to configure the V4 adapter with the correct name and WEP code.
    However the adapter never connects to the router.
    Suggestions would be appreciated. Thanks
  2. Esquire

    Esquire Mesquire Staff Member Member

    Why the switch to v4? Did you uninstall the WUSB11 driver and client before installing the new version?
  3. cfj6

    cfj6 LI Guru Member

    Two computers and one USB adapter so I bought a second adapter. I have uninstalled the V2.6 adapter as far as I can tell. It does not show in System device manager.
    Adapters have always been difficult to install on the Win 98se PC. Plug and Pray. I always follow the sequence of installing the driver then plug in the adapter as instructed by Linksys.Thanks for your reply.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice