Problem With Asus WL500G Premium Triggered

Discussion in 'Tomato Firmware' started by sheerspt, Dec 25, 2007.

  1. sheerspt

    sheerspt LI Guru Member


    I installed the firmware Tomato 1.13 and tried to open the doors TCP: 1-65535 and UDP: 1-65535 and when I use the emule, utorrent or another program of the bug me that the doors are not open.

    I use option in my router: Triggered Port Forwarding


    Could you please someone help me.

  2. u3gyxap

    u3gyxap Network Guru Member

    That is because you shouldn't use triggering. Use regular port forwarding instead.
  3. sheerspt

    sheerspt LI Guru Member

    On some computers the Triggered work for other does not work. I already tried to open manually with the Port Forwarding but when I try to use a given program in network LAN Emule or Torrents of me the error "Port not open."

    Yesterday it worked for a few hours but then ceased to function properly.
  4. Slavedriver

    Slavedriver LI Guru Member

    Shouldn't you just use DMZ in that case ?
  5. sheerspt

    sheerspt LI Guru Member

    Should I turn from the DMZ? That is what you said?
  6. FRiC

    FRiC LI Guru Member

    Since you're forwarding every single port, you might as well use DMZ. Just enable DMZ, and put in the destination IP address.
  7. sheerspt

    sheerspt LI Guru Member

    Enable the DMZ and put the ips of equipment that are linked in a network on router?

    Regards sheers.
  8. FRiC

    FRiC LI Guru Member

    DMZ only works with one IP address. If you want to use P2P apps on more than one computer, you need to set the client on each computer to use a different port, and forward that port to the corresponding IP on your router.

    And use basic forwarding, triggered is for something else.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice