Problem with wrt54g in client mode

Discussion in 'Cisco/Linksys Wireless Routers' started by pat1133, Jun 3, 2005.

  1. pat1133

    pat1133 Network Guru Member

    I have flashed two wrt54g with alchemy ver1.0. One of the wrt54g is set to AP and the other is set to Client. I connect a notebook to the wrt54g in client mode and a desktop to the AP. Below is the setup:

    Desktop----wrt54g(AP) channel 6 wrt54g(client)----notebook

    The problem i faced is that the notebook cannot obtain an IP from the AP.

    WRT54g(AP Setting)
    local IP :
    subnet :
    DHCP : On
    Starting IP:
    Mode : AP
    Channel : 6
    SSID : Test
    G Mode

    WRT54g(Client setting)
    Local IP :
    subnet :
    Mode : Client
    Channel : 6
    SSID : Test
    G Mode

    Can anyone help as i am a novice?
  2. windsurfer

    windsurfer Network Guru Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice