problems jtag debrick v1.1

Discussion in 'Cisco/Linksys Wireless Routers' started by boota00, May 8, 2006.

  1. boota00

    boota00 Guest


    I have a v1.1 that I bricked in the dd-wrt upgrade (my fault). It is now at the state of solid red and solid green LEDs from the second of power on.

    I have access to Xilinx cable that I have attached to a header I put on JP2. Using the HairyMaid debrick util, I get that my CPU is not recognized. It is reporting a CPU ID of 7FFFF17F.

    Anyone else seen anythign like this? Have any suggestions?

  2. ccbadd

    ccbadd Network Guru Member

    I had a V3 that I bricked and had to use the linux Debrick utility to fix. I also had the problem with the CPU ID not being recognised. You can edit the source and change the CPU ID from the one in there to the one it finds and recompile. It worked great for me so I be you will be OK also.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice