Question About wrt54gl!

Discussion in 'HyperWRT Firmware' started by everlast30, May 9, 2007.

  1. everlast30

    everlast30 LI Guru Member

    Sorry if i bother with this question.

    A few days ago i bought the wrt54gl router and i am having trouble with the utorrent, it crashes al the conectios except the utorrent, as i read here the hyperwrt-thibor will fix this, so my questions are

    do i have to instal the hyperwrt and then install the hyperwrt-thibor? or just installing this file i will be fine?

    if i chose to change the firmware for another third party or to go back to the official firmware, is that going to be a problem or would i just flash the firmware back to wherever i want?

    after installing the hyperwrt is there any FAQ about configuring the QoS for the BitTorrent and games?

    and for the gran finale! is there anything that you think i should know before flashing the firmware?

    thanks to all in advance!!

    saludos (greetings)
  2. Thibor

    Thibor Super Moderator Staff Member Member

    just install the Thibor15c file although you will need to unzip it first. you shouldn't have any issues flashing back to Linksys' firmware or to any other 3rd party firmwares should HyperWRT not be to your tastes. you should erase the nvram when you have flashed, just go to the factory settings page when you're in the web interface of Hyperwrt.
  3. everlast30

    everlast30 LI Guru Member

    WOW!!! that was FAST!

    last question! the password goes back again to the admin/admin or changes to root/admin? or stays like my las modification?

    thanks for the quick answer!
  4. ifican

    ifican Network Guru Member

    When you first flash the device your username and password will be exactly the same as it was before you flashed it. However if clear nvram as recommended your username password with revert back to default which i believe is admin/admin.
  5. Thibor

    Thibor Super Moderator Staff Member Member

    in actual fact, there is no username but the password by default is indeed "admin", we recommend using user/pass of admin/admin to keep it simple.
  6. everlast30

    everlast30 LI Guru Member

    ok, since last night, the router is running the HyperWRT-Thibor15c, so far so good!! i been downloading from bittorrents allnight at 100-150 kb/s and uploading at a limited rate of 20kb/s. so far the router is behaving!! with the stock firmware it will crash after 2 or 4 hours downloading torrents!

    and now the questions!:
    where can i find the options to boost the signal of the wireless?
    where can i find some info about the commands that i can run over the textbased console and the scripts that i can make?

    thanks for all the help!

    saludos (greetings)

    Ok i found where to change the power of the Wireless, by default is in 50%, can i put it all the time at 100% or this will burn something?

  7. frenchy2k1

    frenchy2k1 LI Guru Member

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice