RADIUS tutorial

Discussion in 'Cisco/Linksys Wireless Routers' started by guido331, Jul 21, 2006.

  1. guido331

    guido331 Network Guru Member

    Is there a tutorial or some kind of walkthrough somewhere that details how to setup RADIUS (Windows 2003 IAS) with a WRT54G? I've been googling this but haven't had much luck.

    Here's what I have so far:

    WRT54Gv2 Linksys Firmware Version: v4.30.5
    Wireless security set to WPA Enterprise (AES)
    Radius server address is set to my win 2003 RADIUS server
    Port is set to 1812
    Key Renewal Timeout is set to 3600 seconds

    On my RADIUS server I just did the quick setup wizard for the wireless policy and pretty much accepted all the defaults. The client vendor is set to RADIUS standard under RADIUS clients and is pointed to the IP of my WRT54G. By all that I can figure this should be working but instead my XP SP2 laptop just hangs at "Validating Identity." Any suggestions?
  2. BrandonIT

    BrandonIT Network Guru Member

    Was anyone ever able to help you? I too am beginning to setup WPA2 Enterprise using a W2k3 IAS as my RADIUS.

    I'm wondering if my RADIUS server has to be inside the firewall or can it be on the WAN?

    Also, is there a client needed on the WinXP workstation client, other than the WPA2 hotfix provided by Microsoft?

    Any help anyone has would be most appreciated.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice