Regarding the LED command in Tomato

Discussion in 'Tomato Firmware' started by Kiwi8, Nov 23, 2008.

  1. Kiwi8

    Kiwi8 LI Guru Member

    From Jon's Tomato FAQ, I found the cron job to turn on the white LED on and off.

    But it seems that "aoss" does not exist, even for those routers that have the "aoss" button. Is there a typo in the FAQ? Can I just have the command "led white on" instead of "led white on aoss on"?
  2. fyellin

    fyellin LI Guru Member

    If you telnet/ssh to your router and type the command "led" with no arguments, it will let you know which lights are user-controllable on your router.

    The complete set, from led.c, is
    { "wlan", "diag", "white", "amber", "dmz", "aoss", "bridge", "mystery" }
    however not every light exists on every router.
  3. Kiwi8

    Kiwi8 LI Guru Member

    Yeah indeed as what u wrote. Thanks. :)
  4. spliff

    spliff LI Guru Member

    On my ASUS WL-520GU the led command appears broken. No matter what I do the led command always turns off the power led. See my other post regarding the air LED on my ASUS WL-520GU. Some people with the WHR-G125 are having the same problem.

    This is the output regardless of what you pass as arguments.

    # led
    led <diag> <on/off> [...]
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice