Remote access issues

Discussion in 'Tomato Firmware' started by steeef, Nov 11, 2008.

  1. steeef

    steeef Guest

    I'm using Tomato 1.21 on a WRT54GL v1.1, which is connected to a LAN behind a separate firewall. I've enabled remote access for both SSH and HTTPS, and they were working fine when I was physically connected to the same switch as the device, but now I can't seem to connect to it at all outside of its LAN or WWAN (HTTPS and SSH connections work fine if I'm physically connected to one of its ports). Connections from outside keep timing out.

    I haven't done anything too radical to the configuration, but I did change it to router mode (from gateway). I also tried limiting access to my internal network via the Remote Web/SSH Admin Restriction setting, but I removed this when I was troubleshooting the problem.

    Any help?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice