Restricting wireless access to IP range

Discussion in 'Networking Issues' started by tgm001, Sep 2, 2008.

  1. tgm001

    tgm001 Addicted to LI Member

    I've got a WRT54GL in router mode on my internal Class C network (not using DHCP or the network port). I'd like to restrict access for people coming in wirelessly on this router to the range -- anything else (e.g., would not go through.

    Is there some way to accomplish this with the built-in firmware on the WRT54GL?
  2. CaNsA

    CaNsA Network Guru Member

    Are you using stock Linsys firmware?
  3. tgm001

    tgm001 Addicted to LI Member

    Yes, I should have been more specific -- by built-in firmware I meant the stock Linksys firmware.
  4. CaNsA

    CaNsA Network Guru Member

    Might be worth jumping on some DD-WRT firmware as it will give the facility to accomplish what you are after.

    Check out the wiki and the guides for info about how to upgrade.


  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice