Routingproblem at Linksys WRT54GS

Discussion in 'Sveasoft Firmware' started by ralfK, Oct 10, 2004.

  1. ralfK

    ralfK Network Guru Member

    at testing my two WRT54G I am hit to the following problem:
    I have connected Computer1 with the AP (WRT54GS) and the Computer2 with the Client (WRT54G).

    Wenn I try to ping at the same time from Computer1 to the Client and to the Computer2, then stops the first ping (e.g. to Client) when I start the second ping (e.g. to Computer2)! When I start the first Ping again, then stops the second ping!

    But from Computer2 I can at the same time ping to Computer1 and to the AP.

    Any tips are welcome?

    I have the two WRT54 as follow konfig:
    - Firmware Satori-4.0 v2.07.1.7sv
    - The WRT54GS as AP and the WRT54G as Client
    - Security Mode: WPA PSK
    - WPA Algorithms: TKIP
    - Authentication Type: Shared Key
    - Bandwidth Mgmt: disable
    - Loopback: disable
    - Routing: enable
    under Advanced Routing:
    - Operating Mode: RIP2 Router
    - Dynamic Routing: LAN & Wireless

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice