Rubberband Syndrome Connections

Discussion in 'DD-WRT Firmware' started by cloutlo, Mar 24, 2008.

  1. cloutlo

    cloutlo Guest

    Hi guys,

    I made a test set-up composed of
    3,5 km sloped road
    1 AP using a WRT54GL with dd-wrt.v24_micro_wrt54gv8
    1 Client side with aWRT54GS confirgured as a client

    In the shop the setup is working well. ie my pc connected to the client router can see the internet...

    Here is the tests scenarios

    I bakcup my pick-up truck at less than 10 feet from AP, my laptop beside me and I have a 100% signal and I can see the access point and joint it.

    I drive down the road and I have a 50% of signal and -67db but I can't connect to my AP 3,5km up hill! But I 'see' the radio signal.

    At this point, I turn off the power supply and shut downed both router and amp. Turn it on again and never be able to see the AP again no signal, mute, silent, off !

    I drove back up hill back-up to 10 feet from AP and bingo, seeing the AP, drive down to 3,5km keep along down to 50% -67db. Same proc: Shutdown and silent on the boot up.

    It's like a rubberband....

    Need help !

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice