Rv042 Access Rules And Vpn Traffic

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by guedez, Sep 18, 2007.

  1. guedez

    guedez LI Guru Member

    I would like to use access rules in order to select what kind of traffic will flow IN and OUT my network.
    Specifically I would like only to flow in direction LAN -> WAN the services mentioned: DNS, HTTP, HTTPS, POP3, SMTP, RDP.
    And I would like to flow in direction WAN -> LAN the services mentioned: security cameras to a server in the lan side, port 80.

    If i configure all these rules with the highest priorities, and at the end add a rule denying all the rest from ANY to ANY in both directions (that makes 2 rules, 1) From LAN source / deny / any to any, and 2) From WAN side / deny/ any to any) with the lowest priority, when using the QuickVPN software to connect to my LAN, i cannot access any PC from the LAN side, nor ping, rdp, or anything. If I disable these last 2 rules I can do anything i want via VPN.

    I don't really understand how these rules affect the traffic that comes from a VPN session or tunnel.

    If someone have had a similar problem and have any solution, please post any comment that could help to solve these issue.

    Linksys give no support about these issue. Using RV042 with latest firmware release.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice