Rv042 and Cisco VPN 3005 Concentrator dose it work?

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by Znork, Jan 17, 2007.

  1. Znork

    Znork LI Guru Member

    So dose RV042 work withe Cisco VPN 3005 Concentrator?

    I have been trying to sett this up for like 5 houers today but we get ann errore telling us wrong id.

    We are using the latest firmware, 3des md5!

    Plz help:)
  2. skorell

    skorell Network Guru Member

    Works fine for me.

    I have a similar configuration between a RV042 and 3005 (With Gateway to Gateway mode) and it works fine. I use IKE w/Preshared Key, AES-256/SHA. I did have some initial issues with the Phase1 and 2 SA life times, but once I corrected these items the tunnel came up fine and has been very stable. Are you using Gateway to Gateway mode on the RV042? Any other details would be helpful in troubleshooting this issue.
  3. Znork

    Znork LI Guru Member

    Yes we are using gateway to gate way

    TNX for the help this made me realy happy:) If i know it works ill figure it out:) Ill post more info later today
  4. Znork

    Znork LI Guru Member

    We are getting

    No acceptable Oakley Transform, No Proposal chosen. Please check your SA or preshared key setting
  5. skorell

    skorell Network Guru Member

    What are your current settings for the SA life time for Phase 1 and Phase 2 on the RV042? These will need to match the 3005's SA settings.

    I use 86400 for Phase 1 and 28800 for Phase 2.
  6. Znork

    Znork LI Guru Member

    Sorry for not repalying sooner but have been bussy. We made it work the problem was withe ip adresses! Tnx for the help!
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice