RV042 VPN Connection

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by JASONC, Sep 13, 2005.


    JASONC Network Guru Member

    I have 2 RV042's with a VPN tunnel connected between them.

    The tunnel works fine, I can copy files, map network drives.. however I cannot ping from one subnet to the other.

    Also I want by default there to be no internet access of anykind .
    I want to specifcally open ports for ranges of IP's.
    So I made a rule denying everything, and then created rules for the ranges I want. All the priorities are correct yet it doesn't work. Once I make a rule saying deny, it doesn't matter what i do, nothing will open up.

    Any Ideas?

    Why does the firewall apply to the VPN tunnels?! I want it to be a Virtual Private Network, not two networks connected through a firewall.
  2. guedez

    guedez LI Guru Member

    This happens also to me. I have an rv042 configured with access rules denying all traffic for a range of ips and allowing certain ports to be open to those ips. When I try to ping or to remote control any of the pcs located in that range previously denied, i get no connection. I can't do anything. But when i disable the denying all traffic rule, i can do everything i want to.
  3. Toxic

    Toxic Administrator Staff Member

    ok I have ask someone at linksys forsome help on this.

    I hope this helps
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice