Satori to DD-WRT

Discussion in 'DD-WRT Firmware' started by humsafar, Apr 1, 2005.

  1. humsafar

    humsafar Network Guru Member

    or for that matter any firmware to 3rd party.
    I have Satori on my WRT54G ver 2, wish to change over to DD-WRT 21c. Can i go to this firmware directly via the web interface upgrade or do i need to revert back to a linksys firmware first. If so which version of linksys firmware?

    Satori for me has been up and down, as i am a BT user i find that eventually my network packet loss starts to rise. I belive this is dues to number of connections. I tried to use QoS on satori but found that it only allows you add lower priotities as with BT you can not deduce every possible outgoing port that may be used it is difficult to reduce the traffic generated by this. Also I find enabling BW managment on the Satori firmware causes the router to more quickly deteroite into packet loss.
    I really need to prioritise VOIP to premium on a single IP issued to the SPA-2000 ATA adpater. And deprioritise BT, and increase the connections limit.

    any help or suggestions, even alternative firmware to DD-wrt that may be better for my needs would be appreciated.

    Thanks in advance..
  2. jagboy

    jagboy Network Guru Member

    you could just go to the web intferface and upgrade the firmware from there
  3. beansbbq

    beansbbq Network Guru Member

    Sweet. I also wish to upgrade from Satori to DD-WRT. I'm glad that I can try this through the gui. I wouldn't know how to do it otherwise.
  4. jgutz20

    jgutz20 Network Guru Member

    when i went from talisman (also made by sveasoft, i bricked 2 routers, the only way i was able to do this with web admin or tftp was to go back to the linksys firmware THEN to DD-WRT... i'd do it that way just to be safe
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice