SD card mod - RP3 solder points for V2 hardware

Discussion in 'Modding Forum' started by Scytmo, Oct 9, 2005.

  1. Scytmo

    Scytmo Guest


    I've got a V2 WRT54G that I want to do the SD card mod for, and I am trying to follow the instructions here

    But it isn't clear exactly where the solder points are around RP3. The red annotation on the photograph here seems to show all three solder points (DO, CLK, DI) on the right hand side of RP3 on the bottom three pins. But it looks like the bottom wire (DI) is actually soldered onto the left hand side, and I'm not sure which pins the top two wires are actually soldered onto... the photo isn't clear enough to tell.

    Is there anyone who has successfully done this mod who can tell me precisely which pins, and on which side of RP3, the three solder points should be?

    Thanks very much.
  2. ludo37

    ludo37 Network Guru Member

    hi !
    have you found where the solder points are on the RP3 ?
    it isn t clear on the photo
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice