Site-to-Site IPSEC VPN - RVS4000 to RV082 - Recommendations

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by thedevnull, Feb 19, 2008.

  1. thedevnull

    thedevnull Guest

    I have 3 office locations. The main office has a RV082 and the two satellite offices have RVS4000's. I would like to have a site-to-site IPSEC VPN from the satellite office to the main office RV082.

    Other than the configuration detailed in the RVS4000 is there any routing or ports that need to be opened or any other changes I need to make in the configuration?

    All 3 are on separate 1918 network spaces and there are no overlaps. Will the right and left side see eachother and the general internet without any major fuss?

    Just checking if anyone has had trouble with these before I do it. Any caveats/details are appreciated.

  2. ccb056

    ccb056 Network Guru Member

    I think each router will have to connect to the other two routers.

    I dont think if you have two routers connected only to the main router and not each other the two routers will be able to send packets through the main router to each other.

    By the way, here is a guide for setting up RV082 Gateway to Gateway VPN.
  3. aver5

    aver5 LI Guru Member

    I confirm you have to cross site via VPN connections
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice