Suggestions for ideal configuration, would like to keep wireless networks separate and control bandw

Discussion in 'Tomato Firmware' started by marcw37, Jan 24, 2010.

  1. marcw37

    marcw37 Addicted to LI Member

    Current configuration working great. It consists of cable modem going into (location A) tomato router then wireless bridge to another tomato router (location B) aprox. 500 yards away with external antennas, configued as bridge. This goes to a wireless router (plugged into lan port for local wifi and hardwired access. This is working well.

    My desire is to broadcast wifi access to another location from location B to a new location C
    1. Want to keep networks B & C separate
    2. want to control C's total bandwidth and limit P to P

    My thought: Come off bridge B with separate router configred with Tomato Victec and setup as router, bradcast via WiFi to bridge C. Setup Victec Router limit Bandwith of bridge C.

    Any suggestions would be appreciated. Have done some QOS, but not proficient. Havn't tried Victec, do you think it will work for what I'm trying to do.

    Thanks all, I appreciate any help.

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice