Supports WDS the WRT54G? (connection with a WRE54G)

Discussion in 'Cisco/Linksys Wireless Routers' started by kocke, Nov 6, 2005.

  1. kocke

    kocke Network Guru Member

    I try to connect a WRE54G to a WRT54G and I can't.

    The WRE54G was working with other router, the WAG54G. We try with diferents firmwares. The WRE54G blink blue, it seems it's connecting to the router, but there's no IP connectivity from the devices connected to the WRE54G to the otres devices of the LAN

    do youu know what the problem is?
  2. howardp6

    howardp6 Network Guru Member

    Reset the WRE54G to factory default by unbending a paper clip and pressing the reset button for 15 seconds and then press the auto-configuration button.
  3. kocke

    kocke Network Guru Member

    I tried sometimes and it didn't connect.

    sorry, I forgot to say that the WRT54G is V5, and the exact question is: support the WRT54G V5 WDS?

    thanks and regards
  4. kocke

    kocke Network Guru Member

    I've changed the WRT54G, and the new one is V2.2, this one works with the WRE54G with no problems

  5. virgil

    virgil Network Guru Member

    It seems these WRT54??'s running VxWorks have really lost a lot of the features implemented in the recent official LinkSys Linux/GPL firmware...
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice