Sveasoft Alchemy v1.0 for WRT54G V4 - Will this work

Discussion in 'Sveasoft Firmware' started by TommyRox, Oct 26, 2005.

  1. TommyRox

    TommyRox Network Guru Member

    I have heard if you roll back to V3.01 this will update - can anyone confirm?

    Thanks in advance !

  2. riggits

    riggits Guest

    good luck rolling back ur firmware.
    lol :D
  3. TommyRox

    TommyRox Network Guru Member

    Doesn't work, eh?
  4. Toxic

    Toxic Administrator Staff Member

    I would not try it. Alchemy was NOT designed for the WRT54G v4

    why do people insist on forcing firmware upgrades that were made before the router was made?

    please. make sure you use a compatable firmware. simple.

    either follow this, or brick your router. however it is afterall your choice.
  5. TommyRox

    TommyRox Network Guru Member

    What's the best 3rd party update for the V4 you think?
  6. big_fork

    big_fork Network Guru Member

    I would definately take Toxic's advice on using Alchemy with v4. It is possible to get the update to go through, but it will just brick your router. Being a v4 owner I personally recommend DD-WRT v23b2. It has support for pretty much anything you could want from a router. For more information I would check out the DD-WRT forum, and the official DD-WRT webpage . It is largely based off of Alchemy, so in a sense you are killing two birds with one stone since you originally wanted Alchemy in the first place.
  7. TommyRox

    TommyRox Network Guru Member

    Thanks for the quick responses !!
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice