[Thibor 15c] UPnP Messenger problems when using WDS

Discussion in 'HyperWRT Firmware' started by mw1001, Jan 6, 2007.

  1. mw1001

    mw1001 Network Guru Member

    Hi All,

    I’m experimenting problems with Messenger when turn on WDS.
    My configuration right now is composed by 2 WRT54GS v2.1 running Thibor 15c. The main one is configure to route over PPPoE connection.
    If just the main WRT’s Wi-Fi mode is configured to ‘access point’ only, everything on Messenger works fine. At the moment I start Messenger a port is added in the router’s UPnP session and when Messenger is closed the port is removed.
    Well... After change the Wi-Fi mode to ‘access point + WDS’ the problem begins. When start the Messenger a port is added but 1 second later is removed (I must keep clicking the refresh button to see the port before it disappear).

    The ‘slave’ WDS is configured only to provide access: firewall, UPnP and everything else is disabled.

    Which can be the cause of this problem? The WDS is working fine, as far I tested.

    I tried Messenger 8.0 and 8.1 beta, by Wi-Fi connection and by cable direct connected to main WRT54GS.

    Thanks in advance!
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice