Thibor 15c WAN LED Issues

Discussion in 'HyperWRT Firmware' started by kop48, Jul 24, 2006.

  1. kop48

    kop48 Network Guru Member


    I've got Thibor 15c on a WRT54GS V4 and I've noticed that the LED for the wireless is always on now, plus I can hear the wireless transmitting (it's sitting right next to my speakers, so it 'clicks' in them) even though no wireless devices are turned on. I've put the SES LED script to tell me if someone connects to my startup script and that does work when one of my wireless devices connects, but isn't lit while the little LED is. Is there any way to find if there is something that is attempting to connect to my wireless? My network is secured using WEP since I can't use WPA2 because of drivers on my second laptop do not support it.
  2. kop48

    kop48 Network Guru Member

    Noone can help with this? :'(
  3. Disman_ca

    Disman_ca Super Moderator Staff Member Member

    Don't worry so much and trust the script. The wireless function of the AP polls/broadcast its signal to make sure wifi clients know its there. Its normal the AP transmits even when nothing is connected.
  4. kop48

    kop48 Network Guru Member

    Well, I changed the beacon rate from 100ms to 1000ms and now I don't have that infernal clicking in the speakers anymore. I'll have to try to associate with the AP when I get home from work. If that fails, I'll just setup my other router as an AP upstairs that's not so close to my speakers. ;)

    Thanks for the reply.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice