Thibor's HyperWRT WRT54GS 4.70.6-161005 Released

Discussion in 'HyperWRT Firmware' started by Toxic, Oct 17, 2005.

  1. Toxic

    Toxic Administrator Staff Member

    Based on HyperWRT v2.1b1 and using v4.70.6 Codebase

    Changes from 151005 to 161005 Build

    - Added compile_date to Version in top right corner of gui
    - Added Rate,Tx Power and Wireless Mode to Status_Wireless.asp
    - Numerous web code changes and alignments.
    - Integrated Tofu's 6.2 changes:

    Changes in tofu 6.2
    - Fixed: cron jobs may run more that they should.
    - Fixed: When using Deny in Access Restriction, DNS port was always blocked.
    - Fixed: "iptables -vL" results in SIGSEGV.
    - Fixed: Transmit power wasn't saved if it wasn't set manually.
    - Other entries in the hosts file are now preserved.
    - The entire hostname field is now shown in the DHCP client list.
    - The Active DHCP Table button at the bottom of the Static
    - DHCP page has been replaced by a new Active Client List.
    - The content is a mixture of the ARP table, DHCP table, and wl assoclist.

    FYI this is now in the in the Download section


    only for WRT54GS models only.
  2. Dwibbly

    Dwibbly Network Guru Member

    New Firmware


    I updated to your firmware as always, but the grey buttons, for example startup/firewall scripts just locked up the brouser.

    I thought this was a bug but no it was my system that caused this error.

    I rated the file just 1 for download in hope of a fix, sorry. Can I change that.

    Keep up the good work guys. This is the only firmware worth using.
  3. e-razor

    e-razor Network Guru Member

    If I assign a DCHP scoop of lets say 6 addresses - 22 where the local address is the static DHCP "offers" as the first address which is not in the scoop. This is no big deal in it self and I only wanted to bring this to your attention. By the way, this is the first voluntarily upgrade (151005 to 171005). Every other upgrade was due to a bricked router :)

    Thanx Thibor

  4. Toxic

    Toxic Administrator Staff Member

    Re: New Firmware

    lol no you can't change it....

    I would hate to see what you had voted (if at all) if you found another bug. I take it that you didn't take into account the features that do work, but only the feature that dont :cheering:
  5. PaCkEtGrEmLiN

    PaCkEtGrEmLiN Network Guru Member

    Another great Thibor release :clap:

    Has anybody noticed this or maybe my router is playing tricks on me ....

    Wireless clients in the ActiveClientList.asp do not indicate as being wireless in the Wireless column.

    Regards - PaCkEt
  6. ShiveAhoy

    ShiveAhoy Network Guru Member

    A couple of issues: Drop down listboxes are fuxxored in firefox (certainly selections do not show in the box), and the web admin is no longer accessible if you disable wireless admin access.. I was pulling out my hair on the last one, redoing the static ip's and ports to forward til my eyes bled..

    :sad: :sad: :sad:
  7. belton

    belton Network Guru Member

    Your version of WRT firmware is approaching perfect! :clap: :thumb:
    Thank you so much for your great works!

    Several things I would like to suggest:
    1) Add bandwidth limiter to each client, e.g. Client A: D/L Limit: 300KB, U/L Limit: 40KB. That would be very useful for ADSL.
    2) Extend the length of DDNS entry or support multiple DDNS entries.

    Thank you for your attention~
  8. zaphod

    zaphod Network Guru Member


    best version i have ever used for my WRT54GS. Updated both with this release and get the WDS now running perfekt even with WPA. (with the original hyperwrt only WEP works)...

    so keep on rocking :)

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice