Though would be easy

Discussion in 'Cisco Small Business Routers and VPN Solutions' started by ingalmeyer, Feb 6, 2008.

  1. ingalmeyer

    ingalmeyer LI Guru Member

    I have a RVS4000 and am trying a test for a customer. he needs a printer on a different subnet mask and needs to print to it.

    I though I could just set up a vlan and that would be it, but that did not work.

    What is the easiest way to do this? Example netowkr is on 192.168.254.x with a subnet mask of they need the printer on 192.168.254.x with a different subnet mask.

    Thank you in advance.
  2. astute

    astute LI Guru Member

    A more clear topic would've helped your goal. At least you could've mentioned the type of product you have a problem with.

    Also I think this is not really a RVS4000 related issue but something more general which would better be fitted in: Networking Issues
  3. DocLarge

    DocLarge Super Moderator Staff Member Member

    What steps are you taking to configure the vlan?
  4. ingalmeyer

    ingalmeyer LI Guru Member

    Im not a LAN guy but this is what i did.

    I created a vlan2 with a different subnet mask but the same ip range. set it to non dhcp and saved it.

    after that nothing worked, not my internet or anything, could not ping the router, etc. so, i reset the router to defaults and set it back up for my internet.

    i don't mind learning this, so any help is appreciated.

  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice