Tomato Capable Router for FIOS

Discussion in 'Tomato Firmware' started by c279m, Apr 27, 2010.

  1. c279m

    c279m Guest

    I'm looking to get FIOS with 25/25 and iIm currently running a Buffalo WHR-G54S with Tomato using QOS for my VOIP ATA, SSH for remote tunnel/proxy, CIFS, and some custom scripts to filter out ads. I do alot of torrent DLs and will be using the DMZ port for the Verizon router for the STBs, VOD, guide data, etc.

    Knowing I won't get the throughput on the Buffalo, what's a model with a good CPU/RAM combo that could handle this load? Thanks
  2. mpegmaster

    mpegmaster Addicted to LI Member

    I'm using a Linksys... WRT54G-TM with Tomato Firmware v1.25.8515.2 RAF ND...
    I'm on Verizon FIOS too, with 20 Down and 5 Up... Have install many with the 25/25 connections no issues...

    USE... OPENDNS, it will become your friend too!!!

    OPEN a DMZ STATIC IP on the supplied router from Verizon & TURN OFF their wireless device...

    Check out my signature... It says it all:clap2:

  3. ndoggac

    ndoggac Network Guru Member

    Your Buffalo router will get NAT'd (LAN-> WAN & WAN -> LAN) maximum throughput of approx. 55 Mbps. This should be plenty to handle your current connection. However if you're jones'ing for an upgrade, the Netgear WNR3500L runs Tomato, has gigabit LAN & WAN, and a 480Mhz processor with 64MB RAM that will achieve NAT'd throughput of about 300Mbps. If you want to research other routers, try the following link...

    There is also the ASUS RT-N16, but a friend of mine got it and it had bad overheating problems, he sent it back.,com_chart/Itemid,189/

    I also second the opendns suggestion above.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice