Tomato issue, please help

Discussion in 'Tomato Firmware' started by babyzone2, Dec 25, 2012.

  1. babyzone2

    babyzone2 Serious Server Member

    Hi there:

    thank you for your replies in advance,
    here is the situation:

    I have two routers from Asus. RT-N66U, RT-N16. Both are running Tomato firmware.

    Here is how I setup it up:

    RT-N66U acts as the primary one, connects to the modem. (IP SEG: 192.168.1.X)
    RT-N16 ( acts as secondary, connects WAN port to one of the LAN port from RT-N66U. (IP SEG: 192.168.2.X)

    I have web access enabled on both.

    In one of my computer connects to RT-N66U, I can access to without problem, but I cant access to RT-N16( but I can access it with remote WEB access with port 12345(which I assigned). even with or

    any idea?
  2. Werner

    Werner Networkin' Nut Member

    The Router IP has to be in the same subnet as the rest of the router.
    So your RT-N16 configuration isn't right.

    Guess you will either have to put the RT-N16 in Switch mode (turn DHCP off and work with VLANs on the RT-N66U), or put it in its own subnet (RT-N16 IP will be on IP SEG 192.168.2.x).
    At this moment you are mixing up two subnets...
  3. babyzone2

    babyzone2 Serious Server Member

    no this is right setup, I use that for creating a new wireless network, the wan IP for the secondary is, subnet

    I can do the samething with the stock software from Asus, but not the tomato.

    i think it maybe from the firewall. but i can find anything seems to be related.
  4. Werner

    Werner Networkin' Nut Member

    You just want a new (second) wireless network? Can't you accomplish this with VLAN and a Virtual Wireless Interface? That way you don't even need a second router.
  5. free2share

    free2share Addicted to LI Member

    What's the reason for needing the second wifi, RT-N16? To boost the signal or to isolate the network.

    I agree with the others that you maybe able to accomplish this by using VLANs and you maybe mixing your terminology or understanding of the segment setup. Please clarify the IP address of the WAN / LAN of both Routers. From my understanding, things from the WAN cannot access thing on the LAN without opening up the firewall or changing it from gateway mode to router mode.

    Advanced/Routing/Miscellaneous/Mode -- Router

    Modem (WAN) -- RT-N66U -- (LAN) (WAN) -- RT-N16 -- ???.???.???.??? (LAN)
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice