Tomato Mod 1.21.8002 (Victek)

Discussion in 'Tomato Firmware' started by kiskakas, Jul 28, 2008.

  1. kiskakas

    kiskakas Network Guru Member

    Somebody tested this version? :) Victek, can you show the changelog?
    (Victek's page say its a test version)


  2. jsmiddleton4

    jsmiddleton4 Network Guru Member

    Using here. No problems. If you read the change log for 1.21, 1.20 victek's mod had already included much of .21 in his mod .20. So victek's .20 was already for all intentional purposes .21.

    My guess is not much change from victek's .20 to .21. Maybe a few odds and ends but the core of .20 already was up to speed with dnsmasq updates, etc.

  3. kiskakas

    kiskakas Network Guru Member

    i think i find a bug. On a wrt54gl v1.1 cannot get ip address from another wrt54g (using victek Tomato_RAF_1.20.8002) using wireless client mode.
  4. Victek

    Victek Network Guru Member

    I mentioned already in my blog and almost of my post asking the same.... only change to DNSmasq 2.45 supplied in oficial version 1.21, it's a test version. I did not test it.. and have some doubts about dnsmaq implementation...

    For the other mod added from 1.20, no changes at all. 1.21.8002 It's a test release.. since I'm very happy with 1.20.8002/8502 behavior. I just change the digit and used DNSmasq official, nothing more.

  5. kiskakas

    kiskakas Network Guru Member


    i understand, just mentioned, what i experienced! :)
  6. rafacard

    rafacard Addicted to LI Member

    I would like to thank victek by the version 1.21 is still in this test, this working perfectly. But I found the following problems:
    -- Maximum of 20 users controlled by banda.
    -- Script firewall is not working. It controls only the upload.
    My need as many others would be a firmware that controls up banda of some 50 users.

    Thanks Victek
  7. Victek

    Victek Network Guru Member

    I think you mean 20 user per IP/MAC bandwidht limiter, yes, if I increase it then we are seriously compromising nvram space. It's a pity but I don't like to corrupt the stability of the firmware.

    About firewall script, please try the official version to check if the problem arises from your script or it's related to any "typo" in the mod. I did not change anything in this module.

    Thanks :biggrin:
  8. rafacard

    rafacard Addicted to LI Member

    Indeed friend
    It works right the script as tomato official.
    In practice are 20 users bloquiados by IP / MAC and up to 18 per script.
    I'm using (Script generator 1.01) in my test the control of funcioando up this perfect, but not applicable to down as you clear blocks, in 250kbps.
  9. Outer Marker

    Outer Marker Guest



    Is NAT-PMP operational in your firmware mod of Tomato? If so, could you provide a screenshot with the options I have for NAT-PMP? Is it just on/off, or do I have the option of rule cleaning and "secure mode" NAT-PMP?

    Please advise.


    -- Outer Marker.
  10. Victek

    Victek Network Guru Member

    No changes in this part, same as official tomato.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice