tomato1.19new function

Discussion in 'Tomato Firmware' started by 88djy, May 11, 2008.

  1. 88djy

    88djy Guest

    Attached Files:

  2. jsmiddleton4

    jsmiddleton4 Network Guru Member

    I'm sorry but did you add these functions? I'm confused.
  3. TexasFlood

    TexasFlood Network Guru Member

    I loaded it for the heck of it on a non-critical router & it loaded fine. Weird that the binaries and source are both labeled v1.13 although it does appear to be a modified version of v1.19. There is a new menu entry labeled "New Functions" (beneath "Access Restriction"). Clicking on it shows new pages labeled "QoS Limit", "ARP Binding" and "Show NVRAM". "Show NVRAM" does exactly what it says. I haven't had long to look at the others yet.

    *Update - While this loaded fine on my WDS access routers, when I loaded this on my primaty router connected to the cable modem, it seemed unable to obtain a WAN DHCP address so I went back to the official v1.19 release of Tomato on that one.
  4. Toxic

    Toxic Administrator Staff Member

    I would be dubious of this firmwares authenticity since you have said the source has 1.13 all over it and the author is is a new user to this forum.
  5. LLigetfa

    LLigetfa LI Guru Member

    Ja, strange that the author did not even introduce him/herself. No explanations or anything. and both have APNIC addresses. 99% of the brute force attacks against my servers are from APNIC.

    Jon tried upgrading busybox on 1.14 and rolled it back on 1.15 because of problems.
  6. LLigetfa

    LLigetfa LI Guru Member

    DHCP problems was the reason Jon cited for rolling back busybox.
  7. TexasFlood

    TexasFlood Network Guru Member

    I know you're probably right, but I couldn't help but want to play. It does seem to do what OP stated it would and source was provided. But for now I'm back to stock Tomato v1.19 new and will sandbox it off if I do play with it again.
  8. mraneri

    mraneri Network Guru Member

    If I'm going to be paranoid, how do you know the posted source matches the posted binary? Unless you compile it yourself, you really don't know...
  9. TexasFlood

    TexasFlood Network Guru Member

    I can be paranoid with the best of them and did think of that, :-D "Just cause you're paranoid doesn't mean they aren't after you". My curiosity got the better of me, & my gut told me this is someone trying to contribute. But my gut has told me wrong before so had to remove it after having a look. I look forward to him coming back to the forum and engaging in some discussion.
  10. Victek

    Victek Network Guru Member

    Just gave a try, I used the source files and after a diff with original ones everything is ok, then, I compiled again and after some hours the CPU load goes up to 1.34 1.23 1.34, so there is a high CPU work.
    After I setup the quoslimit gui I don't know how to adjust it, the download speed decreased to 24kbps... and if I disable the option I have still this low download speed, I have to understand more in deep, the structure is OK but the results are not so good.
    No backdoor or any leak, you can try it..:rolleyes:
  11. Asimo

    Asimo Guest

    Made in China:smile:
  12. Victek

    Victek Network Guru Member

    Well, after some days fighting to understand what this mod does I compiled again with some changes and update to Busybox 1.10.2 (Roadkill, thanks for the fun moment yesterday)... and here it is.. a new mod for Tomato.

    I will run this mod for some days to verify everything is perfect and will be released if any of you are interested.

    Note. The text of the post is in spanish but the images are self explanatory.

    Enjoy it :biggrin:
  13. Int15

    Int15 Network Guru Member

  14. Victek

    Victek Network Guru Member

    Not all the features of SG are implemented, but almost of the "real" need are covered. What I think is important (not implemented in SG) is the limit of connected IP's per protocol (in order to avoid a user.warn.kernel error on DNS provoked by Rusty's brain broke) :)

    Thanks for the interest.

    -Int15, I sent you the link for the bin and source code, sorry for slow transfer it's my home web site.
  15. pharma

    pharma Network Guru Member

    Is Vitek's MOD using some modified 88djy mod feature's?

    1.update busybox 1.10.1
    2.mac arp


  16. roadkill

    roadkill Super Moderator Staff Member Member

    Victek upgraded busybox to 1.10.2 and added the arp command
    the new arp binding/qos limit pages were added too.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice