TomatoVPN VPN Setup with MacOS

Discussion in 'Tomato Firmware' started by chevyman142000, Jan 5, 2011.

  1. chevyman142000

    chevyman142000 Networkin' Nut Member

    Hey everyone-

    I am attempting to setup a VPN connection to home so that I can use my home Internet for browsing as well as access files and resources at home while away. I have TomatoVPN setup. I have tried using Viscosity and the built in VPN connection on my Mac with no success. I'm unsure of what I'm doing wrong, so I'm hoping someone can help. Let me know what you need from me so that you can help me to get this working. I am using a static key (which was made using OpenVPN on a PC) and I'm using TAP for the interface. I have port 1195 forwarded to the ip address of the router. No go so far. Let me know if you need anything else. I appreciate the help!

  2. occamsrazor

    occamsrazor Network Guru Member

    Unless you've set it differently, Port 1194 is the standard OpenVPN port.... But you shouldn't need to set any port-forwarding at all, the VPN module takes care of that automatically.
  3. chevyman142000

    chevyman142000 Networkin' Nut Member

    I did have 1195 specified. I changed it to 1194 and it still does not work. Any other ideas?
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice